T-Stands

TC SERIES T-STANDS

The TC Series T-Stands represent the highest quality and most rugged systems available for dedicated filtration of all types of industrial oils. These heavy-duty systems are capable of removing particles and/or free water from all types of oil—even high viscosity gear oils—and are designed for years of dependable service.

TC Series T-Stands are ideal for large reservoirs with high flow rates. With canisters that can accommodate multiple filter types such as microfiberglass drop-in filters, depth filters and bag filters, the TC Series T-Stands can remove everything from large particles and debris, sludge, varnish, and water contamination.

Canisters:

  • Heavy-duty, industrial style with bolt-down lids and heavy gauge cylinder walls. These canisters can accept various size high-capacity microfiber glass, depth, water removal and molecular sieve elements and can be changed very easily.

Pump:

  • Continuous-duty gear pump; 1-40gpm flow rates available

Motor:

  • Washdown, heavy duty

Switch:

  • NEMA 4 industrial-duty

Frame:

  • Heavy-duty rectangular tubing

Lifting Eye Bolts:

  • Allows for easy lifting and maneuverability

Gauges:

  • Pump pressure and differential pressure gauges

Strainer:

  • To protect the pump

Manual Bypass:

  • To bypass filters during oil disposal

Colors:

  • Standard is black; customizable colors available at no extra charge
  • Flow rates
  • Sample valves
  • Strainer type
  • Color
  • Power configurations
  • Filter media types and sizes
  • Type of power phase – single or three
  • Decontaminating systems
  • Flushing new or repaired systems
  • Pre-filtering new oil
  • Collecting oil samples for analysis

Intended Use

  • To be used for offline, secondary filtration and not inline filtration.
  • In general industrial environments, both indoors and outdoors.
  • For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of 32-648cSt (150-3000ssu) within ambient temperature ranges of -25°F to 104°F (-32°C to 40°C).
  • Placed at the same level or below the equipment being filtered and with no more than 12-foot of adequately sized pipe/ hose
  • This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source.

Ambient Operating Temperatures

-25°F to 104°F (-32°C to 40°C)

Oil Temperature Range

  • -15°F to 175°F (-26°C to 79°C)

High-Pressure Switch

  • Shuts down the system’s motor at 65psi (5.49bar)

Pump Relief

  • Opens at 75psi (5.17bar)

Materials

  • Frame: Carbon steel
  • Paint: Industrial powder coat
  • Fittings: Zinc-plated steel, brass, bronze, stainless steel, cast iron
  • Pumps: Steel, Buna-N, iron, Viton®, graphite

Weight

  • Approximately 260-650 lbs (118-295Kg). Will vary depending on options selected